Digivac D215V Vacuum controller plus sensor
Digivac D215V Vacuum controller plus sensor
compact, practical, easy to use vacuum controller with 2 set-points
Introduction
The Digivac D215V is a practical and compact vacuum controller system, complete with a thermocouple vacuum sensor. The D215V vacuum controller box includes two relay set-point controls that are designed to switch a solenoid valve on or off in a hardwired fail-safe manner. If the vacuum tube burns out, dashes are displayed and the relays instantly move to their safe or atmospheric setting.
The A536 vacuum gauge tube measures in the range of 10E-3 to 1000mbar. Vacuum measurements are displayed on a bright 4 digit LED display. Units can be selected in either mbar, kPa or Torr.
The two relay set-point controls are type C rated for 7A and 250V. 3 pin connections are provided to enable normally open (NO) or normally close (NC) wiring for the valves. Additional outputs are available in the form of a 5V analog out punt and an RS232 output. The D215V controller boxes fits conveniently in an 1/8 DIN slot or can be used as desktop controller with the supplied feet.
Features of the unique D215V vacuum controller system
- Compact and practical system
- Includes two relay set-point controls (both NO or NC)
- Measures across 6 decades of pressure; 0.001 to 1000mbar
- Bright 4 digit red LED display
- Displays mbar, kPa or Torr
- 1/8”NPT, DN16KF and DN25KF vacuum connections
- 5V analog and RS232 outputs
- Optional Ethernet connectivity available
- CE and RoHS compliant
Specifications of the D215V vacuum controller kits:
Model |
D215V |
D215VE |
Product # |
||
Vacuum sensor |
Thermocouple |
|
Vacuum range |
0.0013 to 1013mbar |
|
Units |
mbar, kPa, Torr, |
|
Precision |
0.0013-1.3mbar >± 10% |
|
Vacuum connection |
1/8” NPT male |
|
Vacuum reference |
Absolute |
|
Display |
Digital, 10mm 6 digit red LED |
|
Output |
5V analog plus RS232 (DB9 female) |
|
Set-point controls |
2 control relays rated 7A/250V – NO or NC |
|
Ethernet connectivity |
no |
yes |
Power |
100-240VAC, 50/60Hz |
|
Gauge connection cord |
3mtr cable |
|
Dimensions |
43 x 89.5 x 136mm deep (1/8 DIN) |
|
Weight |
0.9kg |
|
Compliance |
CE, RoHS |
|
Technical Support Bulletin: TSB 60-002508 D215V vacuum controller user manual.pdf 
|
|
|
Ordering information for the Digivac D215VE vacuum controller system with ethernet connectivity
|
|
|
Ordering information for EM-Tec KF vacuum flange adapters to 1/8" NPT female thread, stainless steel
|
|||||||||||||||||||||||||||||||
