Tousimis AutoSAMDRI-931 critical point dryer
Tousimis AutoSAMDRI-931 critical point dryer
fully automatic software controlled CPD system with touchscreen
Introduction
processedd with AutoSAMDRI-931 by the University of Connecticut
Top: Collagen Fibers in Esophagus
Bottom: Salamander Epidermis Cilia
The sophisticated, fully automatic, software controlled AutoSAMDRI-931 represent the next generation critical point dryers. All controls are readily accessible through the large, bright LCD touchscreen. The AutoSAMDRI-931 now enables the user to use stored recipes or program and store specific custom recipes. The system includes the Stasis software specific for drying gels and other challenging sample types. Many field proven innovations are incorporated in the AutoSAMDRI-931 to ensure reproducible results through automatic smooth process operation and precise control. There is a choice of three chamber sizes for this unique system; Ø32, Ø64 and Ø86x32mm.
The refined software controlled, fully automatic SAMDRI-931 critical point dryer includes the following features:- Bright LCD touchscreen control
- Use factory default settings or create custom recipes
- Micro metering valves with easy-view vernier handles
- Slow fill control for the most delicate samples
- Internal SOTER condersor separates waste alcohol and CO2
- Stasis software with completer range controls for Gels and other challenging samples
- Stasis software takes advantage of lower density and viscosity parameters for LCO2 and alcohol for complete LCO2 replacement during tradiatinally difficult sample process runs
- Easy top load process chamber
- Teflon chamber inserts for Ø64mm and Ø86mm to reduce chamber size to Ø32mm.
- Illuminated process chamber with view port to monitor chamber status
- Internal particulate filtration down to 0.08µm protect samples and valves
- External mounted Post Purge Filter Assembly allows easy maintenance
- Fast adiabatic chamber cooling with CO2 (<1 minute @ room temperature)
- Internal surfaces inert to LCO2 and ultra-pure alcohols
- Tough, solvent resistent cabinet
- Includes standard accessory kit (see below)
- Internal SOTER Condenser to capture waste alcohol and eliminate purge exhaust noise
- 2 year warranty on all parts and labour
Specification of the Tousimis AutoSAMDRI-931 CDP systems
|
Standard |
Medium |
Large |
Process chamber sizes |
Ø32x32mm |
Ø64x32mm |
Ø86x32mm |
Chamber insert to Ø32mm |
- |
yes |
yes |
Product # |
19-08787A |
19-08787B |
19-08787C |
Temperature gauge |
-30°C to 60°C |
||
Pressure gauge |
0-2000 psi (138 bar) |
||
Exhaust size tubing ID |
Ø6mm |
||
Safety burst disc |
included |
||
Cabinet size WxHxL |
38 x 34 x 51cm |
||
Required area WxD |
61 x 56cm |
||
Power |
230V / 1.5A / 300W |
||
Certifications |
CE & RoHS compliant |
||
Supplied with the following standard accessories:
- Chamber inserts to Ø32mm chamber for the Ø64 and Ø86mm processing chambers
- Flexible high pressure braided stainless steel inert Teflon lined CO2 supply hose, 1.5m long
- External LCO2 filtration systems (#19-087840 removes water/oil and particulates down to 0.5um
- Pre-installed filter housing (#19-087840) onto the LCO2 high pressure hose
- Flexi-exhaust tubing provided for easy installation
- Flow meter for precise periodic BLEED exhaust rate flow control
- Spare chamber O-ring (2), chamber lamps (2) and 5A slow fuses (2).
- Operating manual
Quotation information for Tousimis AutoSAMDRI-931 critical point dryer systems
|
|
|
