product field
product field2
contact field
contact field2

EM-Tec holders and stubs for the JEOL NeoScope table top SEMs
fully compatible with the JEOL NeoScope JCM-6000plus, JCM-6000 and JCM-5000


                                                                    A few examples
examples of EM-Tec sample stubs and sample holders for JEOL table top SEMs EM-Tec VS26 compact double action spring-loaded vise holder for up to 26mm, M4 EM-Tec V22 compact vise type sample holder for up to 22mm, M4 EM-Tec TV25 variable 0-90° angle tilt holder for stubs up Ø38mm, M4 EM-Tec GR20 bulk sample holder for up to Ø20mm, gilded brass, M4

    1- EM-Tec V22 compact vise type sample holder for up to 22mm
    2- EM-Tec VS26 compact double action spring-loaded vise holder for up to 26mm
    3- EM-Tec TV25 variable 0-90° angle tilt holder for stubs up Ø38mm
    4- EM-Tec GR20 bulk sample holder for up to Ø20mm, gilded brass


Introduction

 The special selection of EM-Tec sample holders and sample stubs compatible with the JEOL NeoScope table top SEMs allows for increased productivity, quicker sample holding and improved imaging. The standard JEOL NeoScope series table top SEMs comprises X/Y movements of 35mm and allows for a maximum height of 50mm. The standard sample stage provides X/Y movements and Z adjustment, but tilt and rotation are only optionally available.  Currently available stubs and holder for the JEOL NeoScope series are:

  1. 1. EM-Tec stage adapter for JEOL NeoScope table top SEMs
  2. 2. EM-Tec sample holders
  3. 3. EM-Tec S-Clip holders on JEOL stubs
  4. 4. EM-Tec sample stubs up to 32mm diameter
  5. 5. EM-Tec sample stub adapters for pin stubs and Cambridge S4 mounts


 

1 - EM-Tec JV40 stage adapter kit for the JEOL NeoScope series table top SEMs :


 

The EM-Tec JV40 stage adapter kit is fully compatible with the standard X/Y stage of the JEOL NeoScope JCM-6000plus, JCM-6000 and JCM-5000 table top SEMs. With the EM-Tec JV40 stage adapter, a vast range of sample holders can be used on the JEOL NeoScope, offering improved sample handling and access to the vast range of EM-Tec versatile sample holders. It consists three parts:

  • Stage adapter discs insert with female M6 thread
  • Brass stage adapter pillar (adjustable height) with male M6 thread and M4 screw on top
  • aluminium M6 locking ring.

It replaces the standard JEOL NeoScope stage adapter as a drop in style replacement.  The top of the adjustable height pillar includes an M4 screw. Fully compatible with all EM-Tec SEM sample holders with M4 threaded hole.

 

2 –EM-Tec sample holders for the JEOL NeoScope series table top SEMs


The EM-Tec sample holders with M4 threaded hole are fully compatible with the JEOL NeoScope table top SEMs using the EM-Tec JV-40 stage adapter. The sample holders fir within the stage travel limits and maximum available height.  With the EM-Tec holders, tilt can be added to the sample movements. The EM-Tec sample holders enable quick and secure holding of samples without the use of adhesives.

Capacity, use and dimensions of the EM-Tec sample holders:
( images at ordering information)

Product #

Holder type

Capacity

Holder size

Sample holding method

12-000331

EM-Tec HS2 mini tube / needle clamp

0 – Ø2mm

Ø15x10mm x M4

Set screw

12-000311

EM-Tec HS3 mini SampleClamp

2mm thickness

Ø15x10mm x M4

Screw/washer

12-000334

EM-Tec GS24 gripping stub

0-4mm

24x13x12mm x M4

Plate + set screws

12-000306

EM-Tec HS6 mini cylinder stub vise

0 – 6mm

Ø15x10mm x M4

Set screw

12-000330

EM-Tec HS9 mini split mount vise

0 – 8mm

Ø15x10mm x M4

Mini vise jaws

12-000315

EM-Tec HS15 stub vise clamp

0- 16mm

Ø25x10mm x M4

Set screw

12-000328

EM-Tec HS7 mini dual slot vise

2 x 1mm

Ø15x6mm x M4

Set screw

12-000312

EM-Tec J4 multi JEOL Ø9.5mm stub holder

4x Ø9.5mm

Ø32x10mm x M4

Set screw

12-000313

EM-Tec J3 multi JEOL Ø12.2mm stub holder

3x Ø12.2mm

Ø32x10mm x M4

Set screw

12-000324

EM-Tec HS16 stub clamp

0 – Ø16mm

Ø25x10mm x M4

Set screw

12-000345

EM-Tec H45P pre-tilt 45° for pin

Ø3.2mm pin

Ø12.7x17mm x M4

Set screw

12-003315

EM-Tec HS19 swivel stub vise clamp

0-16mm/90°-0°-90°

Ø12.7x17mm x M4

M4

12-003340

EM-Tec HS17 mini swivel vise holder

0-4mm/90°-0°-90°

Ø12x23mm x M4

Set screw

12-003330

EM-Tec HS18 mini swivel split mount vise

0-8mm/90°-0°-90°

Ø15x30mm x M4

Mini vise clamps

12-003110

EM-Tec HGS10 swivel head sample holder

010mm/90°-0°-90°

Ø25x30mm x M4

Set screws

12-000341

EM-Tec H45 pre-tilt 45° for M4

M4

Ø12.7x17mm x M4

Set screws

12-003211

EM-Tec HS15 swivel mount

Ø15mm, 0-180°

Ø15x30mm x M4

Adhesive

12-000347

EM-Tec TV12 variable tilt mount

11x12mm, 0-90°

14x14x14/20mm

Adhesive

12-000348

EM-Tec TV25 variable tilt holder

M4, 0-90°

35x25x10.5/29.5mm

M4

12-000326

EM-Tec M26 metallographic mount holder

Ø25mm / Ø1”

Ø34x12.5mm

Set screw

12-000332

EM-Tec M32 metallographic mount holder

Ø30mm / Ø1-1/4”

Ø40x12.5mm

Set screw

12-000323

EM-Tec GB16 vise bulk sample holder

16mm

22x19x10mm

Set screw

12-000325

EM-Tec B26 vise bulk sample holder

26mm

34x24x13mm

Set screw

12-000317

EM-Tec GR20 bulk sample holder

Ø20mm

Ø25x10mm

Set screw

12-000333

EM-Tec R32 bulk sample holder

Ø32mm

Ø40x12.5mm

Set screw

12-000300

EM-Tec V22 compact vise holder

22mm

39x25x22mm

Screw driven vise jaw

12-000321

EM-Tec VS12 spring-loaded vise holder

12mm / Ø18mm

30x25x15mm

Spring loaded vise jaw

12-000322

EM-Tec VS26 spring-loaded vise holder

26mm / Ø34mm

50x25x15mm

Spring loaded vise jaw

12-000308

EM-Tec SC1 SampleClamp small

15x10mm

23x20x9mm

2x S-Clamp strips

12-000309

EM-Tec SC2 SampleClamp medium

25x15mm

33x25x9mm

2x S-Clamp strips

12-000310

EM-Tec SC2R SampleClamp recessed

25x15mm

33x25x14mm

2x S-Clamp strips


 

3 – EM-Tec S-Clip holders for the JEOL NeoScope series table top SEMs


The EM-Tec S-Clips holders with the spring-loaded sample clips compatible with the JEOL NeoScope series table top using the EM-Tec JV40 stage adapter are:

  •  standard horizontal
  •  45°  and 45° /90°  sample stubs
  • 90° sample stubs.

They are useful to hold thin sample such as Si wafer chips, metal strips, plastic foils, etc.

Specifications of the EM-Tec S-Clip holders for the JEOL NeoScope series: ( images at ordering information)

Product #

Style

Stub size

 S-Clips #

12-004920-1/2/3

Horizontal

Ø25x10mm

1 or 2 or 3

12-004930-1/2/3

Horizontal

Ø32x10mm

1 or 2 or 3

12-004911

+/- 90°

Ø15x15mm

1

12-004925

45°

Ø25x16mm

1

12-004927

45°/90°

Ø25x16mm

2

12-004929

2 x 90°

Ø25x16mm

2

12-004914

4 x 90°

12.7 x 12.7mm

4

 

4 – EM-Tec sample stubs for the JEOL NeoScope series table top SEMs

The JEOL NeoScope series table top SEMs mostly uses the 25mm JEOL stubs. These are also used on the optionally available tilt/rotation stage. When using the EM-Tec sample holders, the standard JEOL 9.5, 12.2,25 and 32mm stubs can be used as well. Currently available JEOL stubs for the JEOL NeoScope JCM-6000plus, JCM6000 and JCM-5000 are:

  • Standard flat JEOL cylinder stubs with the popular 25, 9.5, 12.2 and 32mm diameters. Available with heights of 5 and 10mm.
  • Angled JEOL cylinder stubs with 45°, 45/90° and 90° pre-tilt surfaces.
  • Dish type pin stub with 12.2mm diameter and recessed top for fluid samples and solutions.
( images at ordering information)

 

5 - EM-Tec SEM stub adapters for the JEOL NeoScope series table top SEMs:   

With the EM-Tec SEM stub adapters, you can use the standard pin stubs, Cambridge S4 stubs and Zeiss pin stubs on the JEOL NeoScope series tabletop SEMs. The JEOL stubs with the M4 threaded base fit directly on the EM-Tec JV-40 stage adapter and do not require a stub adapter.  With a stub adapter, there is no need to re-mount the sample and sample integrity is maintained. Also useful for using calibration standards which are be mounted on a pin stub. Recommended SEM stub adapters are:

EM-Tec H15P stub adapter with M4 thread to accept all standard and Zeiss type pin stubs
EM-Tec HS4 adapter with M4 thread to accept the 32mm Cambridge S4 mounts


Specifications and size of the JEOL M4 adapters: ( images at ordering information)

Product #

Type

Accepts and adapts to

Base

Overall size

11-000304

H15P

Pin stubs with Ø3.2x9.5mm & Ø3.2x6mm pin

M4 thread

Ø15x15mm

11-000305

HS4

Cambridge S4 mount

M4 thread

Ø30x10mm


1 Order information for the JEOL TM style stage adapter:


*Prices are without tax. Tax might be added in cart.


EM-Tec JV40 versatile SEM stage adapter with M4 screw for JEOL Neoscope JCM6000 and JCM5000 table top SEMs EM-Tec JV40 versatile SEM stage adapter with M4 screw for JEOL Neoscope JCM6000 and JCM5000 table top SEMs
Product # Unit Price* Add to Quote / Cart
11-000540 each €95,00
Qty:




2 Order information for the EM-Tec sample holders compatible with the JEOL NeoScope series table top SEMs:


*Prices are without tax. Tax might be added in cart.


    # 12-000334   EM-Tec GS24 gripping stub holder with clamping plate, 0-4mm, aluminium, M4

EM-Tec GS24 gripping stub holder with clamping plate, 0-4mm, aluminium, M4 EM-Tec GS24 gripping stub with clamping plate to hold cross section samples or tissue up to 4mm thickness. Sample is held by the clamping plate which is pushed with set screws. Also useful for holding tissue for dehydration and CPD processing. Holder dimensions are 24x12x12mm x M4.

EM-Tec GS24 gripping stub holder with clamping plate, 0-4mm, aluminium, M4
Product # Unit Price* Add to Quote / Cart
12-000334 EM-Tec GS24 gripping stub holder with clamping plate, 0-4mm, aluminium, M4
Qty:

each €27,50


    # 12-000331   EM-Tec HS2 mini M4 cylinder stub tube/needle clamp 2mm , 15x10mm, M4

EM-Tec HS2 mini M4 cylinder stub tube/needle clamp 2mm , 15x10mm, M4 EM-Tec HS2 mini M4 cylinder tub/needle clamp. Capacity is 2mm maximum, the needle is secured with a small set screw. This holder is ideal for probes, needles, wire and thin tubes. The perfect holder for the Cameca Atom Probe Microscope needle shaped samples. Holder size is 15x10mmxM4.

EM-Tec HS2 mini M4 cylinder stub tube/needle clamp 2mm , 15x10mm, M4
Product # Unit Price* Add to Quote / Cart
12-000331 EM-Tec HS2 mini M4 cylinder stub tube/needle clamp 2mm , 15x10mm, M4
Qty:

each €18,50


    # 12-000306   EM-Tec HS6 mini M4 cylinder stub vise clamp 0-6mm, 15x10mm, M4

EM-Tec HS6 mini M4 cylinder stub vise clamp 0-6mm, 15x10mm, M4 EM-Tec HS6 mini M4 cylinder stub vise clamp for sample thickness from 0-6mm. The sample is held vertically with a small set screw. Simple and cost-effective way to clamp cross sections of thin samples. Holder stub size is 15x10mmxM4.

EM-Tec HS6 mini M4 cylinder stub vise clamp 0-6mm, 15x10mm, M4
Product # Unit Price* Add to Quote / Cart
12-000306 EM-Tec HS6 mini M4 cylinder stub vise clamp 0-6mm, 15x10mm, M4
Qty:

each €18,50


    # 12-000315   EM-Tec HS15 M4 cylinder stub vise clamp 0-16mm, 25x10mm, M4

EM-Tec HS15 M4 cylinder stub vise clamp 0-16mm, 25x10mm, M4 EM-Tec HS15 M4 cylinder stub vise clamp for sample thickness from 0-16mm. The sample is held vertically with a set screw (multiple lengths are supplied). Cost effective and practical small vise clamp base on the stub size of 25x10mmxM4.

EM-Tec HS15 M4 cylinder stub vise clamp 0-16mm, 25x10mm, M4
Product # Unit Price* Add to Quote / Cart
12-000315 EM-Tec HS15 M4 cylinder stub vise clamp 0-16mm, 25x10mm, M4
Qty:

each €24,50


    # 12-000323   EM-Tec GB16 bulk sample holder for up 16mm, gilded brass, M4

EM-Tec GB16 bulk sample holder for up 16mm, gilded brass, M4 EM-Tec GB16 with M4 thread. Rectangular type bulk sample holder with two side brackets for sample thickness up to 16mm. Made from brass, 1m thick gold plated. Ideal for smaller samples and smaller SEMs. Provided with 4 set screws.

EM-Tec GB16 bulk sample holder for up 16mm, gilded brass, M4
Product # Unit Price* Add to Quote / Cart
12-000323 EM-Tec GB16 bulk sample holder for up 16mm, gilded brass, M4
Qty:

each €44,00


    # 12-000328   EM-Tec HS7 mini M4 cylinder stub dual slot vise clamp, 2x1mm, 15x6mm, M4

EM-Tec HS7 mini M4 cylinder stub dual slot vise clamp, 2x1mm, 15x6mm, M4 EM-Tec HS7 mini pin stub dual slot vise with two slots of one mm wide. Ideal for holding thin wafer like samples for cross section imaging. Sample are clamped by set screws. Holder size w/o pin is 15x6mm.

EM-Tec HS7 mini M4 cylinder stub dual slot vise clamp, 2x1mm, 15x6mm, M4
Product # Unit Price* Add to Quote / Cart
12-000328 EM-Tec HS7 mini M4 cylinder stub dual slot vise clamp, 2x1mm, 15x6mm, M4
Qty:

each €19,50


    # 12-000347   EM-Tec TV12 mini variable 0-90 angle tilt sample holder 11x12mm, angle indicators at 0, 30, 45, 70 and 90 degrees, M4

EM-Tec TV12 mini variable 0-90 angle tilt sample holder 11x12mm, angle indicators at 0, 30, 45, 70 and 90 degrees, M4 EM-Tec TV12 mini variable tilt mount allows 0-90 angle in a small sample mount; available with pin stub or M4 thread. The sample need to be mounted on the tilting platform of this compact holder. Side engravings on the tilting platform assist in setting the desired tilt angle.

EM-Tec TV12 mini variable 0-90 angle tilt sample holder 11x12mm, angle indicators at 0, 30, 45, 70 and 90 degrees, M4
Product # Unit Price* Add to Quote / Cart
12-000347 EM-Tec TV12 mini variable 0-90 angle tilt sample holder 11x12mm, angle indicators at 0, 30, 45, 70 and 90 degrees, M4
Qty:

each €51,00


    # 12-000348   EM-Tec TV25 variable 0-90 angle tilt holder for stubs up 38mm, M4

EM-Tec TV25 variable 0-90 angle tilt holder for stubs up 38mm, M4 EM-Tec TV25 larger variable tilt holder allows 0-90 angle for sample stubs or sample holders up 38mm. Larger stubs can be mounted, but tilting can be limited, depending on the SEM used. Compatible with both pin or Hitachi M4 threaded stubs or holders.

EM-Tec TV25 variable 0-90 angle tilt holder for stubs up 38mm, M4
Product # Unit Price* Add to Quote / Cart
12-000348 EM-Tec TV25 variable 0-90 angle tilt holder for stubs up 38mm, M4
Qty:

each €145,00


    # 12-000324   EM-Tec HS16 M4 cylinder stub round clamp up to 16mm, 25x10mm, M4

EM-Tec HS16 M4 cylinder stub round clamp up to 16mm,  25x10mm, M4 EM-Tec HS16 M4 cylinder stub to clamp round shaped samples up to 16mm in diameter. Samples are held by a set screw in the middle of a 25mm Hitachi stub. Holder stub size is 25x10mmxM4.

EM-Tec HS16 M4 cylinder stub round clamp up to 16mm, 25x10mm, M4
Product # Unit Price* Add to Quote / Cart
12-000324 EM-Tec HS16 M4 cylinder stub round clamp up to 16mm, 25x10mm, M4
Qty:

each €24,50


    # 12-000325   EM-Tec B26 bulk sample holder for up 26mm, aluminium, M4

EM-Tec B26 bulk sample holder for up 26mm, aluminium, M4 EM-Tec B26 wit M4 thread. Rectangular type bulk sample holder with two side bracket for sample thickness up to 26mm. Made from vacuum grade aluminium. Provided with 8 set screws.

EM-Tec B26 bulk sample holder for up 26mm, aluminium, M4
Product # Unit Price* Add to Quote / Cart
12-000325 EM-Tec B26 bulk sample holder for up 26mm, aluminium, M4
Qty:

each €47,00


    # 12-000300   EM-Tec V22 compact vise type sample holder for up to 22mm, M4

EM-Tec V22 compact vise type sample holder for up to 22mm, M4 EM-Tec V22 compact vise sample holder for sample sizes up from 0-22mm with M4 thread. One fixed jaw and a spindle driven moving jaw. Jaw height is 10mm, clamping width is 25mm. Cost-effective compact vise which can be used in both standard SEMs and table top SEMs. Made from vacuum grade aluminium, brass spindle and stainless steel screws. More info

EM-Tec V22 compact vise type sample holder for up to 22mm, M4
Product # Unit Price* Add to Quote / Cart
12-000300 EM-Tec V22 compact vise type sample holder for up to 22mm, M4
Qty:

each €107,50


    # 12-000345   EM-Tec H45P fixed 45 pre-tilt holder for pin stubs/holders, 12.7x17mm, M4

EM-Tec H45P fixed 45 pre-tilt holder for pin stubs/holders, 12.7x17mm, M4 EM-Tec H45P fixed 45 tilt holder for standard and Zeiss pin stubs. Image sample surfaces or cross sections directly under 45 w/o having to use the tilt on the SEM stage. Particularly useful for table top SEMs without tilt facilities or to extend tilt angles for limited tilt stages. Overall size is 12.7x17mmxM4.

EM-Tec H45P fixed 45 pre-tilt holder for pin stubs/holders, 12.7x17mm, M4
Product # Unit Price* Add to Quote / Cart
12-000345 EM-Tec H45P fixed 45 pre-tilt holder for pin stubs/holders, 12.7x17mm, M4
Qty:

each €39,50


    # 12-000312   EM-Tec J4 multi stub holder for 4 x 9.5mm JEOL stubs, 31.5x10mm, M4

EM-Tec J4 multi stub holder for 4 x 9.5mm JEOL stubs, 31.5x10mm, M4 EM-Tec J4 multi holder for 4 of the JEOL 9.5mm sample stubs. Holder size is 32x10mm.

EM-Tec J4 multi stub holder for 4 x 9.5mm JEOL stubs, 31.5x10mm, M4
Product # Unit Price* Add to Quote / Cart
12-000312 EM-Tec J4 multi stub holder for 4 x 9.5mm JEOL stubs, 31.5x10mm, M4
Qty:

each €38,50


    # 12-000341   EM-Tec H45 fixed 45 pre-tilt holder for Hitachi M4 stubs/holders, 12.7x17mm, M4

EM-Tec H45 fixed 45 pre-tilt holder for Hitachi M4 stubs/holders, 12.7x17mm, M4 EM-Tec H45 fixed 45 tilt holder Hitachi M4 cylinder stubs. Image sample surfaces or cross sections directly under 45 w/o having to tilt the SEM stage. Particularly useful for table top SEMs without tilt facilities or to extend tilt angles for limited tilt stages. Overall size is 12.7x17mmxM4.

EM-Tec H45 fixed 45 pre-tilt holder for Hitachi M4 stubs/holders, 12.7x17mm, M4
Product # Unit Price* Add to Quote / Cart
12-000341 EM-Tec H45 fixed 45 pre-tilt holder for Hitachi M4 stubs/holders, 12.7x17mm, M4
Qty:

each €39,50


    # 12-000308   EM-Tec SC1 SampleClamp SEM holder, 15x10mm sample area, M4

EM-Tec SC1 SampleClamp SEM holder, 15x10mm sample area, M4 EM-Tec SC1 SampleClamp with a clamping area of 15x10mm. Small and thin wire, strips, fibers, cables can be clamped down with the strips at the side to examine the outside surface. No use of adhesive keeps the surface clean and allows for rotating the sample to examine the sample at different angles.

EM-Tec SC1 SampleClamp SEM holder, 15x10mm sample area, M4
Product # Unit Price* Add to Quote / Cart
12-000308 EM-Tec SC1 SampleClamp SEM holder, 15x10mm sample area, M4
Qty:

each €67,00


    # 12-000326   EM-Tec M26 metallographic mount holder for 25mm / 1inch mounts, M4

EM-Tec M26 metallographic mount holder for 25mm / 1inch mounts, M4 EM-Tec M26 metallographic mount holder for holding 25mm or 1 metallographic or petrographic mounts with embedded samples, M4.

EM-Tec M26 metallographic mount holder for 25mm / 1inch mounts, M4
Product # Unit Price* Add to Quote / Cart
12-000326 EM-Tec M26 metallographic mount holder for 25mm / 1inch mounts, M4
Qty:

each €25,50


    # 12-000313   EM-Tec J3 multi stub holder for 3 x 12.2mm JEOL stubs, 31.5x10mm, M4

EM-Tec J3 multi stub holder for 3 x 12.2mm JEOL stubs, 31.5x10mm, M4 EM-Tec J3 multi holder for 4 of the JEOL 12.2mm sample stubs. Holder size is 32x10mm.

EM-Tec J3 multi stub holder for 3 x 12.2mm JEOL stubs, 31.5x10mm, M4
Product # Unit Price* Add to Quote / Cart
12-000313 EM-Tec J3 multi stub holder for 3 x 12.2mm JEOL stubs, 31.5x10mm, M4
Qty:

each €36,50


    # 12-000317   EM-Tec GR20 bulk sample holder for up to 20mm, gilded brass, M4

EM-Tec GR20 bulk sample holder for up to 20mm, gilded brass, M4 EM-Tec GR20 with M4 thread. Round type bulk sample holder with three brackets for round and awkwardly shaped samples up to 20mm. Made from brass, 1m thick gold plated. Ideal for smaller samples and smaller SEMs. Provided with 6 set screws.

EM-Tec GR20 bulk sample holder for up to 20mm, gilded brass, M4
Product # Unit Price* Add to Quote / Cart
12-000317 EM-Tec GR20 bulk sample holder for up to 20mm, gilded brass, M4
Qty:

each €44,00


    # 12-000321   EM-Tec VS12 compact single action spring-loaded vise holder for up to 12mm, M4

EM-Tec VS12 compact single action spring-loaded vise holder for up to 12mm, M4 EM-Tec VS12 is a compact single action spring-loaded vise for samples with a maximum clamping size of 12mm. The vise is opened by pushing the moving vise jaw with a push rod. The push rod can be removed when the holder is loaded in the SEM. Dowel pins can be inserted in the fixed and moving jaws to increase the opening to a sample size up to 18mm diameter or to hold awkwardly shaped samples; 4 dowel pins are included. Made from vacuum grade aluminium with stainless steel rods and springs. More info

EM-Tec VS12 compact single action spring-loaded vise holder for up to 12mm, M4
Product # Unit Price* Add to Quote / Cart
12-000321 EM-Tec VS12 compact single action spring-loaded vise holder for up to 12mm, M4
Qty:

each €145,50


    # 12-000309   EM-Tec SC2 SampleClamp SEM holder, 25x15mm sample area, M4

EM-Tec SC2 SampleClamp SEM holder, 25x15mm sample area, M4 EM-Tec SC2 SampleClamp with a clamping area of 25x15mm. Longer and thicker wire, strips, fibers, cables can be clamped down with the strips at the side to examine the outside surface. No use of adhesive keeps the surface clean and allows for rotating the sample to examine the sample at different angles.

EM-Tec SC2 SampleClamp SEM holder, 25x15mm sample area, M4
Product # Unit Price* Add to Quote / Cart
12-000309 EM-Tec SC2 SampleClamp SEM holder, 25x15mm sample area, M4
Qty:

each €72,50


    # 12-000332   EM-Tec M32 metallographic mount holder for 30mm / 32mm / 1-1/4inch mounts, M4

EM-Tec M32 metallographic mount holder for 30mm / 32mm / 1-1/4inch mounts, M4 EM-Tec M32 metallographic mount holder for holding 30mm, 32mm or 1-1/4 metallographic or petrographic mount with embedded samples.

EM-Tec M32 metallographic mount holder for 30mm / 32mm / 1-1/4inch mounts, M4
Product # Unit Price* Add to Quote / Cart
12-000332 EM-Tec M32 metallographic mount holder for 30mm / 32mm / 1-1/4inch mounts, M4
Qty:

each €25,50


    # 12-000322   EM-Tec VS26 compact double action spring-loaded vise holder for up to 26mm, M4

EM-Tec VS26 compact double action spring-loaded vise holder for up to 26mm, M4 EM-Tec VS26 is a compact double action spring-loaded vise for sample with a maximum clamping size of 26mm with M4 thread. Due to the double sided spring, this vise acts as a centering vise. The vise jaws are opened by push rods which can be remove when the sample holder is loaded in the SEM. Dowel pins can be inserted in the jaws to increase sample size up to 34mm diameter or to hold irregular shaped samples; 4 dowel pin are included. Made from vacuum grade aluminium and stainless steel rods and springs. More info

EM-Tec VS26 compact double action spring-loaded vise holder for up to 26mm, M4
Product # Unit Price* Add to Quote / Cart
12-000322 EM-Tec VS26 compact double action spring-loaded vise holder for up to 26mm, M4
Qty:

each €215,00


    # 12-000310   EM-Tec SC2R recessed SampleClamp SEM holder, 25x15mm sample area, M4

EM-Tec SC2R recessed SampleClamp SEM holder, 25x15mm sample area, M4 EM-Tec SC2R SampleClamp with a recessed area of 25x15mm. The recessed part leaves the sample area to be examined fully free standing. This allows for a complete rotation of the sample to examine all sides. The recessed area tends to be out of focus which leaves more emphasis on the sample. Tip: to avoid signal from the recessed area, one could place a carbon disc underneath the sample; this will greatly reduce both electron and X-ray signal.

EM-Tec SC2R recessed SampleClamp SEM holder, 25x15mm sample area, M4
Product # Unit Price* Add to Quote / Cart
12-000310 EM-Tec SC2R recessed SampleClamp SEM holder, 25x15mm sample area, M4
Qty:

each €87,00


    # 12-000333   EM-Tec R32 bulk sample holder for up to 32mm, aluminium, M4

EM-Tec R32 bulk sample holder for up to 32mm, aluminium, M4 EM-Tec R32 with M4 thread. Round type bulk sample holder with three brackets for round and awkwardly shaped samples up to 32mm. Equally useful as metallographic mounts holder for 30mm / 1-1/4 mounts. Made from vacuum grade aluminium. Provided with 9 set screws

EM-Tec R32 bulk sample holder for up to 32mm, aluminium, M4
Product # Unit Price* Add to Quote / Cart
12-000333 EM-Tec R32 bulk sample holder for up to 32mm, aluminium, M4
Qty:

each €47,00


    # 12-000311   EM-Tec HS3 mini M4 cylinder stub SampleClamp 0-2mm , 15x10mm, M4

EM-Tec HS3  mini M4 cylinder stub SampleClamp 0-2mm , 15x10mm, M4 EM-Tec HS3 mini M4 cylinder stub SampleClamp to clamp thin samples, foils, Si wafer pieces etc. directly on the stub. Samples are held down by a washer under the small screw. More effective and cleaner than using tape or conductive paint/paste. Holder stub size is 15x10mmxM4.

EM-Tec HS3 mini M4 cylinder stub SampleClamp 0-2mm , 15x10mm, M4
Product # Unit Price* Add to Quote / Cart
12-000311 EM-Tec HS3 mini M4 cylinder stub SampleClamp 0-2mm , 15x10mm, M4
Qty:

each €18,50


    # 12-003315   EM-Tec HS19 swivel clamp for up to 16mm samples, aluminium, M4

EM-Tec HS19 swivel clamp for up to 16mm samples, aluminium, M4 EM-Tec HS19 swivel stub vise clamp for sample thickness from 0-16mm. The sample is held with a set screw (multiple length are provided). The swivel hinge allows close to 90 tilt both ways. Holder size is 25x30mm xM4.

EM-Tec HS19 swivel clamp for up to 16mm samples, aluminium, M4
Product # Unit Price* Add to Quote / Cart
12-003315 EM-Tec HS19 swivel clamp for up to 16mm samples, aluminium, M4
Qty:

each €68,50


    # 12-003330   EM-Tec HS18 mini swivel split mount vise for up to 8mm, aluminium, M4

EM-Tec HS18 mini swivel split mount vise for up to 8mm, aluminium, M4 EM-Tec HS18 mini swivel split mount vise for samples up to 8mm thickness. The sample is held between the mini vise clamps. This swivel holder allows can be tilted 90 both ways. Holder size is 15x30mm xM4.

EM-Tec HS18 mini swivel split mount vise for up to 8mm, aluminium, M4
Product # Unit Price* Add to Quote / Cart
12-003330 EM-Tec HS18 mini swivel split mount vise for up to 8mm, aluminium, M4
Qty:

each €69,50


    # 12-003340   EM-Tec HS17 mini swivel vise holder for up to 4mm, aluminium, M4

EM-Tec HS17 mini swivel vise holder for up to 4mm, aluminium, M4 EM-Tec HS17 mini swivel vise holder for sample thickness up to 4mm. Sample is held with a set screw; ideal for Si chips and thin sample cross sections. This swivel holder allows for full 90 tilt both ways. Holder size is 12x23mm xM4.

EM-Tec HS17 mini swivel vise holder for up to 4mm, aluminium, M4
Product # Unit Price* Add to Quote / Cart
12-003340 EM-Tec HS17 mini swivel vise holder for up to 4mm, aluminium, M4
Qty:

each €49,50


    # 12-003110   EM-Tec HGS10 swivel head sample holder for up to 10mm, gold plated brass, M4

EM-Tec HGS10 swivel head sample holder for up to 10mm, gold plated brass, M4 EM-Tec HGS10 swivel head sample holder is made from gold plated brass to enable easy cleaning and to resist contamination. Maximum sample thickness is 10mm; sample is clamped with two thumb screws. Sample can be clamped from opposite ways. This swivel holder allows for full 90 tilt both ways. Holder size is 28x16x32mm x M4.

EM-Tec HGS10 swivel head sample holder for up to 10mm, gold plated brass, M4
Product # Unit Price* Add to Quote / Cart
12-003110 EM-Tec HGS10 swivel head sample holder for up to 10mm, gold plated brass, M4
Qty:

each €99,50


    # 12-000330   EM-Tec HS9 mini split mount vise 0 - 8mm, M4

EM-Tec HS9 mini split mount vise 0 - 8mm, M4 EM-Tec HS9 mini split mount vise clamp for sample thickness from 0-8mm. The sample is clamped between the two jaws of the split mount. The split mount vise jaws are closed by two allen screws. Closed mini split mount vise dimensions are 15x10mm; when opened 24x15x10mm.

EM-Tec HS9 mini split mount vise 0 - 8mm, M4
Product # Unit Price* Add to Quote / Cart
12-000330 EM-Tec HS9 mini split mount vise 0 - 8mm, M4
Qty:

each €23,50


    # 12-003211   EM-Tec HS15 Hitachi stub swivel mount, 15x21mm, aluminium, M4

EM-Tec HS15 Hitachi stub swivel mount, 15x21mm, aluminium, M4 EM-Tec HS15 Hitachi swivel stub mount. The head of the mount is attached to the cylinder stub via a swivel hinge which allows for 90 degrees tilting each way. Can be rotated 360 degrees in the cylinder stub. Excellent mount for SEMs without tilting facilities or when random tilt angled are needed. When the desired tilt angle is set, the top is secured with a socket cap screw. Top diameter is 15mm and the total height is 30mm.

EM-Tec HS15 Hitachi stub swivel mount, 15x21mm, aluminium, M4
Product # Unit Price* Add to Quote / Cart
12-003211 EM-Tec HS15 Hitachi stub swivel mount, 15x21mm, aluminium, M4
Qty:

each €49,50



3 Order information for the EM-Tec S-Clip holders compatible with the JEOL NeoScope series table top SEMs:


*Prices are without tax. Tax might be added in cart.

5 each EM-Tec copper alloy S-Clips with 5 each brass M2x3mm screws
5 each EM-Tec copper alloy S-Clips with 5 each brass M2x3mm screws
Product # Unit Price* Add to Quote / Cart
12-000900 5 each EM-Tec copper alloy S-Clips with 5 each brass M2x3mm screws
Qty:

pkg/5 €24,50

EM-Tec HS15C S-Clip swivel mount sample holder with 1xS-Clip, 15mm, M4
EM-Tec HS15C S-Clip swivel mount sample holder with 1xS-Clip, 15mm, M4
Product # Unit Price* Add to Quote / Cart
12-004911 EM-Tec HS15C S-Clip swivel mount sample holder with 1xS-Clip, 15mm, M4
Qty:

each €54,50

EM-Tec S-Clip sample holder with 1xS-Clip 45 on 25mm stub, M4
EM-Tec S-Clip sample holder with 1xS-Clip 45 on 25mm stub, M4
Product # Unit Price* Add to Quote / Cart
12-004925 EM-Tec S-Clip sample holder with 1xS-Clip 45 on 25mm stub, M4
Qty:

each €18,50

EM-Tec S-Clip sample holder with S-Clip(s) on 25x10mm stub, M4
EM-Tec S-Clip sample holder with S-Clip(s) on 25x10mm stub, M4
Product # Unit Price* Add to Quote / Cart
12-004920-1 EM-Tec S-Clip sample holder with 1x S-Clip on 25x10mm stub, M4
Qty:

each €16,50
12-004920-2 EM-Tec S-Clip sample holder with 2x S-Clips on 25x10mm stub, M4
Qty:

each €21,50
12-004920-3 EM-Tec S-Clip sample holder with 3x S-Clips on 25x10mm stub, M4
Qty:

each €26,50

EM-Tec S-Clip sample holder with 2xS-Clips  45/90 on 25 stub, M4
EM-Tec S-Clip sample holder with 2xS-Clips 45/90 on 25 stub, M4
Product # Unit Price* Add to Quote / Cart
12-004927 EM-Tec S-Clip sample holder with 2xS-Clips 45/90 on 25 stub, M4
Qty:

each €23,50

EM-Tec S-Clip sample holder with S-Clip(s) on 32x10mm stub, M4
EM-Tec S-Clip sample holder with S-Clip(s) on 32x10mm stub, M4
Product # Unit Price* Add to Quote / Cart
12-004930-1 EM-Tec S-Clip sample holder with 1x S-Clip on 32x10mm stub, M4
Qty:

each €16,50
12-004930-2 EM-Tec S-Clip sample holder with 2x S-Clips on 32x10mm stub, M4
Qty:

each €21,50
12-004930-3 EM-Tec S-Clip sample holder with 3x S-Clips on 32x10mm stub, M4
Qty:

each €26,50

EM-Tec S-Clip sample holder with 2xS-Clips double 90 on 25mm stub, M4
EM-Tec S-Clip sample holder with 2xS-Clips double 90 on 25mm stub, M4
Product # Unit Price* Add to Quote / Cart
12-004929 EM-Tec S-Clip sample holder with 2xS-Clips double 90 on 25mm stub, M4
Qty:

each €23,50

EM-Tec S-Clip sample holder with 4xS-Clips at 90, 12.7x12.7x14mm, M4
EM-Tec S-Clip sample holder with 4xS-Clips at 90, 12.7x12.7x14mm, M4
Product # Unit Price* Add to Quote / Cart
12-004914 EM-Tec S-Clip sample holder with 4xS-Clips at 90 , 12.7x12.7x14mm, M4
Qty:

each €39,50



4 Order information for the EM-Tec cylinders tubs compatible with the JEOL NeoScope series table top SEMs:


*Prices are without tax. Tax might be added in cart.

JEOL  9.5x5mm cylinder SEM sample stub, aluminium JEOL 9.5x5mm cylinder SEM sample stub, aluminium
Product # Unit Price* Add to Quote / Cart
10-005010-50 JEOL 9.5x5mm cylinder SEM sample stub, aluminium
Qty:

pkg/50 €18,50
10-005010-100 JEOL 9.5x5mm cylinder SEM sample stub, aluminium
Qty:

pkg/100 €35,00

JEOL  12.2x5mm cylinder SEM sample stub, aluminium JEOL 12.2x5mm cylinder SEM sample stub, aluminium
Product # Unit Price* Add to Quote / Cart
10-005012-50 JEOL 12.2x5mm cylinder SEM sample stub, aluminium
Qty:

pkg/50 €19,50
10-005012-100 JEOL 12.2x5mm cylinder SEM sample stub, aluminium
Qty:

pkg/100 €38,50

JEOL  25x5mm cylinder SEM sample stub, aluminium JEOL 25x5mm cylinder SEM sample stub, aluminium
Product # Unit Price* Add to Quote / Cart
10-005025-10 JEOL 25x5mm cylinder SEM sample stub, aluminium
Qty:

pkg/10 €5,50
10-005025-50 JEOL 25x5mm cylinder SEM sample stub, aluminium
Qty:

pkg/50 €22,50
10-005025-100 JEOL 25x5mm cylinder SEM sample stub, aluminium
Qty:

pkg/100 €44,00

JEOL  9.5x9.5mm angled SEM sample stub with 45 degree, aluminium JEOL 9.5x9.5mm angled SEM sample stub with 45 degree, aluminium
Product # Unit Price* Add to Quote / Cart
10-005105-10 JEOL 9.5x9.5mm angled SEM sample stub with 45 degree, aluminium
Qty:

pkg/10 €17,50
10-005105-50 JEOL 9.5x9.5mm angled SEM sample stub with 45 degree, aluminium
Qty:

pkg/50 €78,50

JEOL  25x8mm cylinder SEM sample stub, aluminium JEOL 25x8mm cylinder SEM sample stub, aluminium
Product # Unit Price* Add to Quote / Cart
10-005028-10 JEOL 25x8mm cylinder SEM sample stub, aluminium
Qty:

pkg/10 €9,50
10-005028-50 JEOL 25x8mm cylinder SEM sample stub, aluminium
Qty:

pkg/50 €43,00

JEOL  9.5x9.5mm angled SEM sample stub with 45 and 90 degree, aluminium JEOL 9.5x9.5mm angled SEM sample stub with 45 and 90 degree, aluminium
Product # Unit Price* Add to Quote / Cart
10-005109-10 JEOL 9.5x9.5mm angled SEM sample stub with 45 and 90 degree, aluminium
Qty:

pkg/10 €18,50
10-005109-50 JEOL 9.5x9.5mm angled SEM sample stub with 45 and 90 degree, aluminium
Qty:

pkg/50 €83,00

JEOL  25x10mm cylinder SEM sample stub, aluminium JEOL 25x10mm cylinder SEM sample stub, aluminium
Product # Unit Price* Add to Quote / Cart
10-005125-10 JEOL 25x10mm cylinder SEM sample stub, aluminium
Qty:

pkg/10 €8,50
10-005125-50 JEOL 25x10mm cylinder SEM sample stub, aluminium
Qty:

pkg/50 €39,00
10-005125-100 JEOL 25x10mm cylinder SEM sample stub, aluminium
Qty:

pkg/100 €74,00

JEOL  25x12.7mm cylinder SEM sample stub, aluminium JEOL 25x12.7mm cylinder SEM sample stub, aluminium
Product # Unit Price* Add to Quote / Cart
10-005126-10 JEOL 25x12.7mm cylinder SEM sample stub, aluminium
Qty:

pkg/10 €12,50
10-005126-50 JEOL 25x12.7mm cylinder SEM sample stub, aluminium
Qty:

pkg/50 €57,00

JEOL  12.2x10mm angled SEM sample stub with 45 degree, aluminium JEOL 12.2x10mm angled SEM sample stub with 45 degree, aluminium
Product # Unit Price* Add to Quote / Cart
10-005115-10 JEOL 12.2x10mm angled SEM sample stub with 45 degree, aluminium
Qty:

pkg/10 €19,00
10-005115-50 JEOL 12.2x10mm angled SEM sample stub with 45 degree, aluminium
Qty:

pkg/50 €86,00

JEOL  25x16mm cylinder SEM sample stub, aluminium JEOL 25x16mm cylinder SEM sample stub, aluminium
Product # Unit Price* Add to Quote / Cart
10-005215-10 JEOL 25x16mm cylinder SEM sample stub, aluminium
Qty:

pkg/10 €18,50
10-005215-50 JEOL 25x16mm cylinder SEM sample stub, aluminium
Qty:

pkg/50 €84,00

JEOL  12.2x10mm angled SEM sample stub with 45 and 90 degree, aluminium JEOL 12.2x10mm angled SEM sample stub with 45 and 90 degree, aluminium
Product # Unit Price* Add to Quote / Cart
10-005119-10 JEOL 12.2x10mm angled SEM sample stub with 45 and 90 degree, aluminium
Qty:

pkg/10 €19,50
10-005119-50 JEOL 12.2x10mm angled SEM sample stub with 45 and 90 degree, aluminium
Qty:

pkg/50 €89,00

JEOL  25x16mm angled SEM sample stub with 45 degree, aluminium JEOL 25x16mm angled SEM sample stub with 45 degree, aluminium
Product # Unit Price* Add to Quote / Cart
10-005127-5 JEOL 25x16mm angled SEM sample stub with 45 degree, aluminium
Qty:

pkg/5 €13,75
10-005127-10 JEOL 25x16mm angled SEM sample stub with 45 degree, aluminium
Qty:

pkg/10 €26,00

JEOL  25x16mm angled SEM sample stub with 45 and 90 degree, aluminium JEOL 25x16mm angled SEM sample stub with 45 and 90 degree, aluminium
Product # Unit Price* Add to Quote / Cart
10-005219-1 JEOL 25x16mm angled SEM sample stub with 45 and 90 degree, aluminium
Qty:

pkg/1 €4,50
10-005219-5 JEOL 25x16mm angled SEM sample stub with 45 and 90 degree, aluminium
Qty:

pkg/5 €20,50

JEOL  25x16mm angled SEM sample stub with double 90 degree, aluminium JEOL 25x16mm angled SEM sample stub with double 90 degree, aluminium
Product # Unit Price* Add to Quote / Cart
10-005225-1 JEOL 25x16mm angled SEM sample stub with double 90 degree, aluminium
Qty:

pkg/1 €4,50
10-005225-5 JEOL 25x16mm angled SEM sample stub with double 90 degree, aluminium
Qty:

pkg/5 €20,50

JEOL Dish stub, 12.2x10 with 1.5mm dish depth, aluminium JEOL Dish stub, 12.2x10 with 1.5mm dish depth, aluminium
Product # Unit Price* Add to Quote / Cart
10-005114-1 JEOL Dish stub, 12.2x10 with 1.5mm dish depth, aluminium
Qty:

pkg/1 €3,30
10-005114-5 JEOL Dish stub, 12.2x10 with 1.5mm dish depth, aluminium
Qty:

pkg/5 €15,60
10-005114-10 JEOL Dish stub, 12.2x10 with 1.5mm dish depth, aluminium
Qty:

pkg/10 €29,80



5 Order information for the EM-Tec stub adapters for the JEOL NeoScope series table top SEMs :


*Prices are without tax. Tax might be added in cart.


    # 11-000304   EM-Tec H15P M4 adapter for pin stub, 15x16mm, M4

EM-Tec H15P  M4 adapter for pin stub,  15x16mm, M4 EM-Tec H15P M4 adapter for pin stubs for standard and short 3.2mm diameter pin stubs. The stem of the pin stub is secured with a set screw. Allows for using the popular pin stubs on Hitachi and JEOL Neoscope table top SEMs. Machined from vacuum grade aluminium. Overall size is 15x16mm. Includes allen key.

EM-Tec H15P M4 adapter for pin stub, 15x16mm, M4
Product # Unit Price* Add to Quote / Cart
11-000304 EM-Tec H15P M4 adapter for pin stub, 15x16mm, M4
Qty:

each €19,50


    # 11-000305   EM-Tec HS4 M4 adapter for Cambridge S4 stubs, M4

EM-Tec HS4  M4 adapter for Cambridge S4 stubs, M4 EM-Tec HS-4 M4 adapter for holding Cambridge S4 mounts. Screws are used to secure the Cambridge S4 mount. Machined from vacuum grade aluminium. Overall size is 30x10mm.

EM-Tec HS4 M4 adapter for Cambridge S4 stubs, M4
Product # Unit Price* Add to Quote / Cart
11-000305 EM-Tec HS4 M4 adapter for Cambridge S4 stubs, M4
Qty:

each €24,50





SEM Supplies

TEM Supplies

Calibration

Sample Preparation

AFM / SPM

  SEM Sample Stubs
  Sample Stub Adapters
  SEM Stage Adapters
  SEM Sample Holders
  SEM Preparation Stands
  Filaments/Cathodes
  Silicon Finder Grid
  Gatan 3View Pins
  FEI Volumescope Pins
  SEM Stub Storage Boxes
  Phenom Supplies
  JEOL NeoScope Supplies
  Hitachi TM series Supplies
  Field & lab sampler kits

Instruments


  Acoustic Enclosures
  Critical Point Dryers
  Cressington SEM Coaters
  HI-Res IR Chamberscope
  TEM Sample Prep
  TEM Grids
  TEM Support Films
  Graphene Films
  Grid Storage Boxes
  Cryo Grid Box
  TEM sample staining
  Filaments/Cathodes
  Cryo Pin for U-M
  Eyelash manipulators

FIB Supplies


  FIB Lift-out grids
  FIB low profile stubs
  FIB grid holders
  FIB pre-tilt holders
  FIB Grid Boxes
  SEM / FIB Magn. Calib.
  SEM Res. Test Spec.
  EDS / WDS Calibration
  TEM Calibration
  AFM / SPM Calibration
  LM Magn. Calibration

Vacuum Supplies


  Bullseye Vacuum Gauges
  D215V Vacuum Controller
  D801W Vacuum Gauges
  Quick-check Gauges
  KF/NW Vacuum Parts
  Vacuum oil and grease
  Vacuum sample storage
  Evaporation baskets
  Quartz QCM Crystals
  Sputter Targets
  Carbon Rods & Fibers
  Quartz QCM Crystals
  Supports & Substrates
  SEM Preparation Stands
  Tweezers
  Probes & Picks
  Cryo Jug & Container
  Applicators & Swabs
  Plastic Transfer Pipettes
  Cutting Tools / Scissors
  Conductive Paint/Cement
  Conductive Tapes &Tabs
  Non-conductive Adhesives
  Stainless Steel Mesh
  Sample Storage
  Tools
  Preparation mats & tiles
  Cleaning / Gloves
  Diamond Polishing Paste
  AFM/SPM Discs
  AFM/SPM Holders
  AFM/SPM Disc Storage
  Cantilever Tweezers
  AFM/SPM Discs Tweezers
  Mica Discs
  HOPG Substrates


LM


  Correlative Cover Slips
  Glass Microscope Slides
  Glass Cover Slips
  Quartz Microscope Slides
  Quartz Cover Slips
  Black metal slides
  Slide storage boxes
  Calibration
  Plastic Transfer Pipettes