Phenom basic SEM sample preparation supplies
Introduction
Introduction In addition to the SEM mounts and holders for the Phenom desk top SEMs, basic SEM sample preparation supplies are indispensable for optimum sample preparation and correct imaging and analysis. They are conveniently presented together on this page. Although the Phenom desk top SEMs include an operation mode to avoid charging, it is good practice to work with conductive samples and to make sure that the samples are grounded by using conductive adhesives. It is recommended to coat the surface of non-conductive sample with a thin layer of gold, using a sputter coater. When using images to generate data for measurements, it is recommended to calibrate to the system the system first with an EM-Tec magnification calibration standard.
Basic sample preparation supplies
The following recommended basic SEM sample preparation supplies for the Phenom desk top SEMs can be conveniently ordered from this page. Additional information can be found on the relevant product pages.
Calibration tools for the Phenom desk top SEMs
Recommended calibration tools for imaging and EDX analysis with the Phenom desk top SEM are:
Ordering information for Phenom basic SEM sample preparation supplies
*Prices without VAT, but within the EU, we have to check for valid VAT-ID.
 |
EM-Tec CXS-3C EDS calibration standard, Al, Cu and C on pin stub |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 36-000503 |
EM-Tec CXS-3C EDS calibration standard with Al, Cu and C op pins tub |
|
| each |
€260,00
|
|
|
 |
EM-Tec CXS-5F light element and EDS calibration standard, 5 materials plus F/C on pin stub |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 36-000505 |
EM-Tec CXS-5F light element and EDS calibration standard, 5 materials plus F/C on pin stub |
|
| each |
€280,00
|
|
|
 |
Value-Tec 2.NM general purpose tweezers, style 2, strong pointed tips, non-magnetic stainless steel |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 50-014020 |
Value-Tec 2.NM general purpose tweezers, style 2, strong pointed tips, non-magnetic stainless steel |
|
| each |
€5,40
|
|
|
|
|
EM-Tec CXS-5F-T traceable light element and EDS calibration standard with unique serial number, 5 materials plus Faraday cup on pin stub |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 36-T00505 |
EM-Tec CXS-5F-T traceable light element and EDS calibration standard with unique serial number, 5 materials plus F/C on pin stub |
|
| each |
€745,00
|
|
|
.jpg) |
EM-Tec CXS-5C-T traceable light element and EDS calibration standard with unique serial, 5 materials plus 200 Mesh TEM grid on pin stub |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 36-T00506 |
EM-Tec CXS-5C-T traceable light element and EDS calibration standard with unique serial, 5 materials plus 200 Mesh TEM grid on pin stub |
|
| each |
€745,00
|
|
|
 |
Value-Tec 3.NM general purpose tweezers, style 3, fine pointed tips, non-magnetic stainless steel |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 50-014030 |
Value-Tec 3.NM general purpose tweezers, style 3, fine pointed tips, non-magnetic stainless steel |
|
| each |
€5,40
|
|
|
 |
Value-Tec 4.NM general purpose tweezers, style 4, fine pointed tips, non-magnetic stainless steel |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 50-014040 |
Value-Tec 4.NM general purpose tweezers, style 4, fine pointed tips, non-magnetic stainless steel |
|
| each |
€5,40
|
|
|
 |
Value-Tec 5A.NM general purpose tweezers, style 5A, off-set finepointed tips, non-magnetic stainless steel |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 50-014055 |
Value-Tec 5A.NM general purpose tweezers, style 5A, off-set finepointed tips, non-magnetic stainless steel |
|
| each |
€5,40
|
|
|
 |
EM-Tec C30F water based conductive carbon paint, no VOC, 40g bottle |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 15-001130F |
EM-Tec C30F water based conductive carbon paint, no VOC, 40g bottle |
|
| each |
€12,75
|
Hazardous Symbol Explanation
 = Hazard Shipping Fee
Cg = Suspected Carcinogen
F = Flammable
I = Irritant
S = Sensitizer
T = Toxic
Extra info 15-001130F :
I | SDS 
|
|
|
 |
Value-Tec DB3 long tip air blower / hand duster, 145 x Ø40 mm |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 52-003005 |
Value-Tec DB3 long tip air blower / hand duster, 145 x Ø40 mm |
|
| each |
€9,50
|
|
|
 |
EM-Tec SB23 medium size clear styrene box for 23 standard Ø12.7mm SEM pin stubs |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 13-090024 |
EM-Tec SB23 medium size clear styrene box for 23 standard Ø12.7mm SEM pin stubs |
|
| each |
€8,95
|
|
|
 |
EM-Tec C38 strong conductive carbon cement, 25g bottle |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 15-001138 |
EM-Tec C38 strong conductive carbon cement, 25g bottle |
|
| each |
€12,90
|
Hazardous Symbol Explanation
= Hazard Shipping Fee
Cg = Suspected Carcinogen
F = Flammable
I = Irritant
S = Sensitizer
T = Toxic
Extra info 15-001138 :
F | I | SDS
|
|
|
 |
EM-Tec SB11 medium size clear styrene box for 11 standard Ø12.7mm SEM pin stubs |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 13-090011 |
EM-Tec SB11 medium size clear styrene box for 11 standard Ø12.7mm SEM pin stubs |
|
| each |
€7,75
|
|
|
 |
EM-Tec SB1 single pin mount storage & transport tube for a single Ø 12.7 or Ø 19mm pin stub |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 13-090001-10 |
EM-Tec SB1 single pin mount storage & transport tube for a single Ø12.7 or Ø19mm pin stub |
|
| pkg/10 |
€3,95
|
| 13-090001-100 |
EM-Tec SB1 single pin mount storage & transport tube for a single Ø 12.7 or Ø 19mm pin stub |
|
| pkg/100 |
€37,50
|
| 13-090001-1000 |
EM-Tec SB1 single pin mount storage & transport tube for a single Ø 12.7 or Ø 19mm pin stub |
|
| pkg/1000 |
€355,00
|
|
|
 |
EM-Tec SB3 heavy-duty large single pin mount storage & transport tube for a single Ø 25.4 or Ø 32mm pin stub |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 13-090003-10 |
EM-Tec SB3 heavy-duty large single pin mount storage & transport tube for a single Ø 25.4 or Ø 32mm pin stub |
|
| pkg/10 |
€13,65
|
| 13-090003-100 |
EM-Tec SB3 heavy-duty large single pin mount storage & transport tube for a single Ø 25.4 or Ø 32mm pin stub |
|
| pkg/100 |
€129,50
|
|
|
 |
Value-Tec 7.NM general purpose tweezers, style 7, curved fine tips, non-magnetic stainless steel |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 50-014070 |
Value-Tec 7.NM general purpose tweezers, style 7, curved fine tips, non-magnetic stainless steel |
|
| each |
€5,40
|
|
|
 |
EM-Tec CT6 high purity conductive double sided adhesive carbon tabs, Ø6mm |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 15-000406 |
EM-Tec CT6 high purity conductive double sided adhesive carbon tabs, Ø6mm |
|
| pkg/108 |
€15,00
|
|
|
 |
EM-Tec AG42 strong and highly conductive silver cement, 15g bottle |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 15-002141 |
EM-Tec AG42 strong and highly conductive silver cement, 15g bottle |
|
| each |
€54,50
|
Hazardous Symbol Explanation
= Hazard Shipping Fee
Cg = Suspected Carcinogen
F = Flammable
I = Irritant
S = Sensitizer
T = Toxic
Extra info 15-002141 :
Cg | F | I | SDS
|
|
|
 |
EM-Tec PS10 Preparation stand horizonal pin stubs up to 100mm diameter |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 15-007510 |
EM-Tec PS10 Preparation stand horizontal for SEM pin stubs up 100mm diameter |
|
| each |
€55,00
|
|
|
 |
EM-Tec CT9 high purity conductive double sided adhesive carbon tabs, Ø9mm |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 15-000409 |
EM-Tec CT9 high purity conductive double sided adhesive carbon tabs, Ø9mm |
|
| pkg/104 |
€15,00
|
|
|
 |
EM-Tec SB153 high capacity clear styrene box for 153 standard 12.7mm SEM pin stubs |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 13-090153 |
EM-Tec SB153 high capacity clear styrene box for 153 standard 12.7mm SEM pin stubs |
|
| each |
€54,50
|
|
|
 |
EM-Tec AG42 strong and highly conductive silver cement, 25g bottle. |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 15-002142 |
EM-Tec AG42 strong and highly conductive silver cement, 25g bottle |
|
| each |
€82,50
|
Hazardous Symbol Explanation
= Hazard Shipping Fee
Cg = Suspected Carcinogen
F = Flammable
I = Irritant
S = Sensitizer
T = Toxic
Extra info 15-002142 :
Cg | F | I | SDS
|
|
|
 |
EM-Tec SCT6 single sided premium conductive copper SEM tape 6mm x 25m |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 15-000806 |
EM-Tec SCT6 single sided premium conductive copper SEM tape 6mm x 25m |
|
| each |
€15,50
|
|
|
 |
EM-Tec CT12 high purity conductive double sided adhesive carbon tabs, Ø12mm |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 15-000412 |
EM-Tec CT12 high purity conductive double sided adhesive carbon tabs, Ø12mm |
|
| pkg/100 |
€15,00
|
|
|
 |
EM-Tec AG44 conductive silver paint, 15g bottle |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 15-002143 |
EM-Tec AG44 conductive silver paint, 15g bottle |
|
| each |
€48,00
|
Hazardous Symbol Explanation
= Hazard Shipping Fee
Cg = Suspected Carcinogen
F = Flammable
I = Irritant
S = Sensitizer
T = Toxic
Extra info 15-002143 :
F | I | SDS
|
|
|
 |
EM-Tec SSB23 super strong clear polycarbonate box for 23 standard Ø12.7mm SEM pin stubs |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 13-090025 |
EM-Tec SSB23 super strong clear polycarbonate box for 23 standard Ø12.7mm SEM pin stubs |
|
| each |
€20,00
|
|
|
|
|
EM-Tec SCT10 single sided premium conductive copper SEM tape 10mm x 25m |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 15-000810 |
EM-Tec SCT10 single sided premium conductive copper SEM tape 10mm x 25m |
|
| each |
€19,50
|
|
|
|
|
EM-Tec AG44 conductive silver paint, 25g bottle |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 15-002144 |
EM-Tec AG44 conductive silver paint, 25g bottle |
|
| each |
€74,50
|
Hazardous Symbol Explanation
= Hazard Shipping Fee
Cg = Suspected Carcinogen
F = Flammable
I = Irritant
S = Sensitizer
T = Toxic
Extra info 15-002144 :
F | I | SDS
|
|
|
 |
EM-Tec SB4 small size clear styrene box for 4 standard 12.7mm SEM pin stubs |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 13-090004 |
EM-Tec SB4 small size clear styrene box for 4 standard 12.7mm SEM pin stubs |
|
| each |
€2,95
Quantity discount: 10 or more:
€2,80
each
|
|
|
 |
EM-Tec 126G.AM SEM pin stub gripper tweezers for Ø12.7mm pin stubs, anti-magnetic stainless steel, 30 degrees angle |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 50-050011 |
EM-Tec 126G.AM SEM pin stub gripper tweezers for Ø12.7mm pin stubs, anti-magnetic stainless steel, 30 degrees angle |
|
| each |
€9,50
|
|
|
 |
EM-Tec CT15 high purity conductive double sided adhesive carbon tabs, Ø15mm |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 15-000415 |
EM-Tec CT15 high purity conductive double sided adhesive carbon tabs, Ø15 mm |
|
| pkg/96 |
€15,00
|
|
|
 |
EM-Tec AG45 conductive silver paint, extra low VOC, 15g bottle |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 15-002147 |
EM-Tec AG45 conductive silver paint, extra low VOC, 15g bottle |
|
| each |
€47,50
|
Hazardous Symbol Explanation
= Hazard Shipping Fee
Cg = Suspected Carcinogen
F = Flammable
I = Irritant
S = Sensitizer
T = Toxic
Extra info 15-002147 :
F | I | SDS
|
|
|
 |
EM-Tec 127G.AM SEM pin stub gripper tweezers for Ø12.7mm pin stubs, anti-magnetic stainless steel |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 50-050012 |
EM-Tec 127G.AM SEM pin stub gripper tweezers for Ø12.7mm pin stubs, anti-magnetic stainless steel |
|
| each |
€9,50
|
|
|
 |
EM-Tec CT25 high purity conductive double sided adhesive carbon tabs, Ø25mm |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 15-000425 |
EM-Tec CT25 high purity conductive double sided adhesive carbon tabs, Ø25mm |
|
| pkg/50 |
€26,50
|
|
|
 |
EM-Tec EDX-Checker S-7 with C, PTFE, Mn, Al/Cu, Co and 400/1000 mesh Ni grids |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 36-000407-P |
EM-Tec EDX-Checker S-7 on Ø12.7 mm standard aluminium pin stub |
|
| each |
€500,00
|
| 36-000407-J |
EM-Tec EDX-Checker S-7 with Ø 25 x10mm JEOL adapter for standard aluminium pin stub |
|
| each |
€515,00
|
| 36-000407-H |
EM-Tec EDX-Checker S-7 with Hitachi M4 adapter for standard aluminium pin stub |
|
| each |
€515,00
|
|
|
|
|
EM-Tec AG46 water-based conductive silver paint, no VOC, 15g bottle |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 15-002145 |
EM-Tec AG46 water-based conductive silver paint, no VOC, 15g bottle |
|
| each |
€59,90
|
Hazardous Symbol Explanation
= Hazard Shipping Fee
Cg = Suspected Carcinogen
F = Flammable
I = Irritant
S = Sensitizer
T = Toxic
Extra info 15-002145 :
I | SDS
|
|
|
 |
EM-Tec 128G.AM SEM pin stub gripper tweezers for Ø12.7mm pin stubs, anti-magnetic stainless steel, 60 degrees angle |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 50-050014 |
EM-Tec 128G.AM SEM pin stub gripper tweezers for Ø12.7mm pin stubs, anti-magnetic stainless steel, 60 degrees angle |
|
| each |
€9,50
|
|
|
 |
EM-Tec 190G.AM SEM pin stub gripper tweezers for Ø19mm pin stubs, anti-magnetic stainless steel |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 50-050019 |
EM-Tec 190G.AM SEM pin stub gripper tweezers for Ø19mm pin stubs, anti-magnetic stainless steel |
|
| each |
€9,50
|
|
|
 |
EM-Tec small multi stub preparation stand for 23 pin stubs |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 15-007523 |
EM-Tec multi stub preparation stand for 23 pin stubs |
|
| each |
€19,50
|
|
|
 |
EM-Tec 254G.AM SEM pin stub gripper tweezers for Ø25.4mm pin stubs, anti-magnetic stainless steel |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 50-050025 |
EM-Tec 254G.AM SEM pin stub gripper tweezers for Ø25.4mm pin stubs, anti-magnetic stainless steel |
|
| each |
€11,50
|
|
|
 |
EM-Tec medium multi stub preparation stand for 38 pin stubs |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 15-007538 |
EM-Tec multi stub preparation stand for 38 pin stubs |
|
| each |
€22,50
|
|
|
 |
EM-Tec EDX-Checker S-8 with C, PTFE, Mn, Al/Cu, Co, AISI 316L and 400/1000 mesh Ni grids |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 36-000408-P |
EM-Tec EDX-Checker S-8 on Ø12.7 mm standard aluminium pin stub |
|
| each |
€600,00
|
| 36-000408-J |
EM-Tec EDX-Checker S-8 with Ø 25 x10mm JEOL adapter for standard aluminium pin stub |
|
| each |
€615,00
|
| 36-000408-H |
EM-Tec EDX-Checker S-8 with Hitachi M4 adapter for standard aluminium pin stub |
|
| each |
€615,00
|
|
|
 |
EM-Tec CT32 high purity conductive double sided adhesive carbon tabs, Ø32mm |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 15-000432 |
EM-Tec CT32 high purity conductive double sided adhesive carbon tabs, Ø32mm |
|
| pkg/24 |
€15,00
|
|
|
 |
EM-Tec double sided conductive copper SEM tape 6mm x 33m |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 15-000206 |
EM-Tec double sided conductive copper SEM tape 6mm x 33m |
|
| each |
€28,50
|
|
|
 |
Micro-Tec PrepBoard, white HDPE , 29.5x24.5cm |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 15-008045 |
Micro-Tec PrepBoard, white HDPE , 29.5x24.5cm |
|
| each |
€14,50
|
|
|
 |
EM-Tec EDX-Checker LE-10 with BN, C, PTFE, Mn, Al/Cu, Co, AISI 316L and 400mesh Ni grid |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 36-000410-P |
EM-Tec EDX-Checker LE-10, Ø12.7 mm standard aluminium pin stub |
|
| each |
€710,00
|
| 36-000410-J |
EM-Tec EDX-Checker LE-10 with Ø 25 x10mm JEOL adapter for standard aluminium pin stub |
|
| each |
€725,00
|
| 36-000410-H |
EM-Tec EDX-Checker LE-10 with Hitachi M4 adapter for standard aluminium pin stub |
|
| each |
€725,00
|
|
|
 |
EM-Tec MCS-1TR traceable magnification calibration standard, 2.5mm to 1µm |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 31-T31000-U |
EM-Tec MCS-1TR traceable calibration standard, 2.5mm to 1µm, unmounted |
|
| each |
€79,50
|
| 31-T31000-1 |
EM-Tec MCS-1TR traceable calibration standard, 2.5mm to 1µm, mounted on standard 12.7mm pin stub |
|
| each |
€89,50
|
| 31-T31000-2 |
EM-Tec MCS-1TR traceable calibration standard, 2.5mm to 1µm, mounted on Zeiss 12.7mm pin stub |
|
| each |
€89,50
|
| 31-T31000-6 |
EM-Tec MCS-1TR traceable calibration standard, 2.5mm to 1µm, mounted on 12.2mm JEOL stub |
|
| each |
€94,50
|
| 31-T31000-8 |
EM-Tec MCS-1TR traceable calibration standard, 2.5mm to 1µm, mounted on 15mm Hitachi stub |
|
| each |
€89,50
|
|
|
 |
EM-Tec Easy-Tabs ECT12 high purity conductive double sided adhesive carbon tabs, Ø12.5 mm |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 15-000413 |
EM-Tec Easy-Tabs ECT12 high purity conductive double sided adhesive carbon tabs, Ø12.5mm |
|
| pkg/100 |
€20,00
|
|
|
|
|
EM-Tec double sided conductive copper SEM tape 12mm x 33m |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 15-000212 |
EM-Tec double sided conductive copper SEM tape 12mm x 33m |
|
| each |
€49,50
|
|
|
 |
Micro-Tec PS1 probe set with Micro-Tec PV1 probe holder and Micro-Tec NS set of 8 fine pointed straight stainless steel needle probes |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 52-001011 |
Micro-Tec PS1 probe set with Micro-Tec PV1 probe holder and Micro-Tec NS set of 8 fine pointed straight stainless steel needle probes |
|
| set |
€14,00
|
|
|
 |
Value-Tec set with 4 probes (VP1/VP2/VP4/VP6) in plastic pouch, 410 stainless steel |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 52-001076 |
Value-Tec set with 4 probes (VP1/VP2/VP4/VP6) in plastic pouch, 410 stainless steel |
|
| set/4 |
€10,95
|
|
|
 |
Micro-Tec PS2 probe set with Micro-Tec PV1 probe holder and Micro-Tec NAS set of 8 fine pointed angled stainless steel needle probes |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 52-001021 |
Micro-Tec PS2 probe set with Micro-Tec PV1 probe holder and Micro-Tec NAS set of 8 fine pointed angled stainless steel needle probes |
|
| set |
€15,00
|
|
|
 |
Micro-Tec MTC-5F Multiple target calibration standard with 4 patterns, Bright Field |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 31-T33600-U |
Micro-Tec MTC-5F Multiple target calibration standard with 4 patterns, unmounted |
|
| each |
€197,50
|
| 31-T33600-3 |
Micro-Tec MTC-5F Multiple target calibration standard with 4 patterns, mounted on 25.4mm pin stub |
|
| each |
€209,50
|
| 31-T33600-7 |
Micro-Tec MTC-5F Multiple target calibration standard with 4 patterns, mounted op 25mm JEOL stub |
|
| each |
€209,50
|
| 31-T33600-9 |
Micro-Tec MTC-5F Multiple target calibration standard with 4 patterns, mounted on 25mm Hitachi stub |
|
| each |
€209,50
|
| 31-T33600-11 |
Micro-Tec MTC-5F Multiple target calibration standard with 4 patterns, mounted on black microscope slide |
|
| each |
€209,50
|
|
|
 |
EM-Tec East-Tab ECT25 high purity conductive double sided adhesive carbon tabs, Ø25 mm |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 15-000426 |
EM-Tec Easy-Tabs ECT25 high purity conductive double sided adhesive carbon tabs, Ø25mm |
|
| pkg/50 |
€31,00
|
|
|
 |
Value-Tec set with 5 probes (VP1/VP2/VP3/VP4/VP5) in plastic pouch, 410 stainless steel |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 52-001077 |
Value-Tec set with 5 probes (VP1/VP2/VP3/VP4/VP5) in plastic pouch, 410 stainless steel |
|
| set/5 |
€13,55
|
|
|
 |
Value-Tec set of 5 general purpose tweezers, includes style 3, 5, 5A, 7 and SS (slim long) non-magnetic stainless steel in a plastic pouch |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 50-014105 |
Value-Tec set of 5 general purpose tweezers, includes style 3, 5, 5A, 7 and SS (slim long) non-magnetic stainless steel |
|
| set/5 |
€12,95
|
|
|
 |
Value-Tec B5 set of 5 general purpose brass tweezers, includes style 3, 5, AA, MM and NN in a plastic pouch |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 50-014855 |
Value-Tec B5 set of 5 general purpose brass tweezers, includes style 3, 5, AA, MM and NN in a plastic pouch |
|
| set/5 |
€12,85
|
|
|
 |
EM-Tec 12.AM scissor type short handle SEM pin stub gripper for Ø12.7mm pin stubs, anti-magnetic stainless steel |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 50-050013 |
EM-Tec 12.AM scissor type short handle SEM pin stub gripper for Ø12.7mm pin stubs, anti-magnetic stainless steel |
|
| each |
€6,50
|
|
|
 |
Value-Tec set of 4 ball holding tweezers tweezers, includes Ø3, 5, 8 and 15mm, non-magnetic stainless steel in a plastic pouch |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 50-014115 |
Value-Tec set of 4 ball holding tweezers tweezers, includes Ø3, 5, 8 and 15mm, non-magnetic stainless steel |
|
| set/4 |
€14,95
|
|
|
 |
EM-Tec FG-1 Silicon Finder Grid Substrate with 144 fields of 1x1mm |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 10-008144 |
EM-Tec FG-1 Silicon Finder Grid Substrate with 144 fields of 1x1mm |
|
| each |
€23,50
Quantity discount: 10 or more:
€21,50
each
|
|
|
 |
EM-Tec 25.AM scissor type long handle SEM pin stub gripper for Ø25.4mm pin stubs, anti-magnetic stainless steel |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 50-050026 |
EM-Tec 25.AM scissor type long handle SEM pin stub gripper for Ø25.4mm pin stubs, stainless steel |
|
| each |
€12,95
|
|
|
 |
Micro-Tec disposable carbon steel scalpels set with plastic handle contains 2x #10/11/15/20/22, individually packed |
| Product # |
Unit |
Price* |
Add to Quote / Order |
| 52-004129 |
Micro-Tec disposable carbon steel scalpels set with plastic handle contains 2x #10/11/15/20/22, individually packed |
|
| box/10 |
€5,50
|
|
|
