pdf download link

Material for Micro-Tec GN insulating glass fibre reinforced polyamide66 probes


             Micro-Tec fibre reinforced plastic probes

 


The material used for manufacturing the Micro-Tec GN series insulating plastic probes is a Polyamide 66 (Nylon 66) reinforced with 50% glass fibres.

It is used for the following products:

#52-001056 Micro-Tec GN1 glass fibre reinforced polyamide 66 probe, fine pointed / strong flat
#52-001057 Micro-Tec GN2 glass fibre reinforced polyamide 66 probe, curved pointed / strong flat
#52-001058 Micro-Tec GN3 glass fibre reinforced polyamide 66 probe, sharp flat / large flat
#52-001059 Micro-Tec GNS glass fibre reinforced polyamide 66 probes, set of all three


General remarks:

  • GN series is the engineering plastic polyamide 66 (PA66) reinforced with 50% fine glass fibre
  • heat stabilised and good heat capacity
  • high rigidity, good tensile strength
  • high fatigue and creep resistance
  • excellent wear and abrasion resistance
  • good chemical resistance against oils, grease, fuels and non-polar solvents
  • not resistant to strong acids, alkalis, hot water or steam
  • insulating
  • typical applications include probes, tweezers, tweezers tips and tool handles

Properties of glass fibre reinforced polyamide 66

Mechanical Properties

Elastic modulus +23°C

16000 MPa

Elastic modulus +60°C

14000 MPa

Elastic modulus +90°C

8000 MPa

Elastic modulus +120°C

5000 MPa

Tensile strength +23°C

220 MPa

Tensile strength +60°C

160 MPa

Tensile strength +90°C

110 MPa

Tensile strength +120°C

85 Mpa

Izod-impact strength (notched) +23°C

140 J/m

Charpy-impact strength (unnotched)

85 kJ/m2

Thermal Properties

Coefficient of thermal linear expansion

7.0 x 10-5 /°C   (20-100°C)

Temp. of defl. under load (1.8 MPa)

235°C

Temp. of defl. under load (0.45 MPa)

255°C

Vicat softening temp. (50°C/h 50N)

250°C

Continuous use (service) temperature

130°C

Maximum service temperature (short)

185°C

Electrical Properties

Comparative tracking index

500 Volts

Electric strength (2mm)

21.0 kV/mm

Other properties

 

Density

1.57 g/cm3

Water absorption (water 23°C)

0.65%



TSB 50-001056 Material for Micro-Tec GN glass fibre reinforced polyamide66 probes Revision 1



SEM Supplies

TEM Supplies

Calibration

Sample Preparation

AFM / SPM

  Product Menu with Images
  SEM Sample Stubs
  Carbon Tabs
  Sample Stub Adapters
  SEM Stage Adapters
  SEM Sample Holders
  SEM Preparation Stands
  Filaments / Cathodes
  Silicon Finder Grid
  Gatan 3View Pins
  FEI Volumescope Pins
  SEM Stub Storage Boxes
  Phenom Supplies
  JEOL NeoScope Supplies
  Hitachi TM Series Supplies
  Field & Lab Sampler Kits
  FlowView liquid sample Kit

Instruments

  Acoustic Enclosures
  Compact sputter coaters
  Cressington SEM coaters
  TEM Sample Prep
  Diaphragm Pump
  Rotary vacuum Pump
  Precision diamond saw  
  TEM Grids
  TEM Support Films
  Silicon Nitride Films
  K-Kit Wet Cell Holder
  Graphene Films
  TEM Grid Boxes
  Cryo Grid Boxes
  TEM Sample Staining
  3mm Embedding Tubes
  Filaments/Cathodes
  Eyelash Manipulators

Cryo Supplies

  Cryo Grid Boxes
  Other Cryo Supplies

FIB Supplies

  FIB Lift-out Grids
  FIB Low Profile Stubs
  FIB Grid Holders
  FIB Pre-tilt Holders
  FIB Pre-tilt stubs
  FIB Grid Boxes
  SEM / FIB Magn. Calib.
  SEM Res. Test Spec.
  EDS / WDS Calibration
  TEM Calibration
  AFM / SPM Calibration
  LM Magn. Calibration

Vacuum Supplies

  Vacuum Gauges
  KF/NW Vacuum Parts
  KF/NW Vacuum Hoses
  Vacuum Oil and Grease
  Vacuum Sealant
  Diaphragm Pump
  Rotary vacuum Pump
  Vacuum Sample Storage
  Vacuum Pick-Up Pens

Sample Coating Supplies

  Sputter Targets
  Carbon Rods & Fibers
  Quartz QCM Crystals
  SEM Sample Coating Fluid

Evaporation Supplies

  Thermal Evaporation Sources
  Evaporation Materials
  Supports & Substrates
  SEM Preparation Stands
  Tweezers
  Probes & Picks
  Applicators & Swabs
  Plastic Transfer Pipettes
  Cutting Tools / Scissors
  Conductive Paint/Cement
  Conductive Tapes & Tabs
  Non-Conductive Adhesives
  Sample Storage
  Hand Tools
  Sorting Wire Mesh
  Preparation Surfaces
  Cleaning / Gloves
  Conductive Metal Powders
  Metallographic Sample Prep
  AFM/SPM Discs
  AFM/SPM Disc Pick-up Tool
  AFM/SPM Holders
  AFM/SPM Disc Storage
  Cantilever Tweezers
  AFM/SPM Discs Tweezers
  Nano-Tec Mica Discs
  HOPG Substrates

Light Microscopy

  Correlative Cover Slips
  Glass Microscope Slides
  Glass Cover Slips
  Quartz Microscope Slides
  Quartz Cover Slips
  Black Metal Slides
  Slide Storage Boxes
  LM Calibration
  Plastic Transfer Pipettes
  Optical Lens Tissue
  Glass Petri Dishes
  PTFE Beakers